Several users have reported a startup issue with their smartwatch since the release of WatchOS 8. The Apple Watch is said to get stuck in a boot loop, with an Apple logo that appears and disappears. The hardware buttons can become unresponsive in rare cases, preventing the device from turning on. # How to Fix Flashing Apple Logo on Apple Watch (GUIDE)

This problem lasts for an hour or longer and is most likely caused by a software update. However, there are other reasons for the Apple Watch to act this way, such as a hardware issue or internal component damage.

Whatever the reason, your Apple Watch becomes unusable and necessitates immediate attention. In this guide, we’ll go over a few options for resolving the error so you can get back to using the fantastic iOS device.

So, what are you waiting for? Let’s get this started!

How to Fix Flashing Apple Logo on Apple Watch (GUIDE)

Check Your Software Version

Although you may be experiencing a flashing Apple logo on your Apple Watch as a result of a recent system upgrade, you should check the Settings app for a newer version release. Each update includes official fixes for bugs that users reported in the previous version, as well as some new features.

You can update your Apple Watch in two ways: directly from the Watch or via the Watch app on your iPhone. Before you begin, make sure your device is connected to a strong Wi-Fi network and has a battery charge of at least 50%.

Follow these steps to upgrade your Apple Watch directly:

• To begin, open your Watch’s Settings app.
• Then go to General and select Software Update from the drop-down menu.

• Select Download & Install if an update is available.
• When the update has finished downloading, select Install.
• Finally, select Continue.

• Install the WatchOS Software Update

Follow these steps to update your Watch with your paired iPhone:

• Start by opening the Watch app on your iPhone.
• Go to the My Watch tab now.
• Then select Software Update from the General menu.

• Then, to finish the process, follow the on-screen instructions.

If this doesn’t fix the Apple Watch’s flashing Apple logo, try some of the other options listed below.

Charge Your Apple Watch

If the first solution doesn’t work, it’s possible that your Apple Watch isn’t charged, resulting in the boot-up screen flashing with the Apple logo. As a result, quickly grab the magnetic charging cable that comes with the Apple Watch Essentials or the magnetic charging dock and charge the device.

30 minutes is the minimum amount of time you should charge your smartwatch. However, before checking if the flashing Apple logo issue has been resolved, make sure it is fully charged.

Force Restart Your Watch

If the flashing Apple logo problem persists, try forcing a restart of the device to see if it helps. When your device is frozen, stuck on a screen, and unresponsive to all other actions, force restarting is the best option. When you choose to force-restart the Apple Watch, the device is turned off and forced to restart.

This is how you do it:

• Long-press the Digital Crown and the Apple Watch’s side button at the same time.
• When the Apple logo appears on your screen, release both buttons after about 10 seconds.

• You’ll be able to use your Apple Watch normally after restarting it. Continue reading if you haven’t already.

Disable Screen Curtain

Internal settings on your device are inextricably linked, and this can sometimes cause performance issues. As a result, if you’re having problems with your system, such as the flashing Apple logo on your Apple Watch, try moving around your Settings.

The flashing Apple logo on Apple Watch has been reported to be fixed by disabling the Screen Curtain feature, according to several users. Here are the steps you must take to resolve the problem on your own:

• To begin, launch the Watch app on your iPhone.
• Then select General from the My Watch tab.
• After that, go to Accessibility and select VoiceOver.

• Then, to disable the feature, tap the Screen Curtain toggle.

Use Find My Apple Watch

Using the Find My feature to get your Apple Watch out of the boot loop is a great way to get to the bottom of the problem quickly. This method can also be used to fix an Apple Watch that is stuck on the Apple logo.

This is what you must do:

• To get started, go to the My Watch tab in the Watch app on your paired iPhone.
• Tap on All Watches in the top left corner of your screen.

• Then, next to your paired Apple Watch, tap the Info icon.
• Now select Find My Apple Watch from the drop-down menu. This will automatically launch the Find My app.

• Log in to the app if prompted.
• Then, from the list of devices, choose your Watch and press Play Sound. The Watch will be forced to exit the Flashing Apple logo screen.

Play the sound a few more times if it doesn’t work.

Re-pair Your Apple Watch

To perform this method, follow the steps below:

• To begin, go to the My Watch tab in the Watch app on your paired device.
• Then, at the top-left, tap on All Watches, tap on the info icon next to your Apple Watch and select Unpair Apple Watch.
• To re-pair, make sure your iPhone’s Bluetooth and Wi-Fi are both turned on. Then, on your Apple Watch, turn it on.
• Tap Continue when you see the message “Use your iPhone to set up this Apple Watch” appear on your screen.
• Connect your Apple Watch to your device.
• Bring your Apple Watch to the viewfinder after that, and you’ll receive a pairing confirmation message.

Reset Your Watch or Contact Apple Support

If none of the previously mentioned fixes work, you can restore your Apple Watch to factory settings. After your iPhone creates a backup of the data on your Watch, this will erase all saved settings and content.

If you believe the issue is with the hardware, go to your nearest Apple Store and seek professional assistance.

This concludes our guide on how to fix the Apple Watch’s flashing Apple logo. We hope that at least one of the solutions was useful. If you have any additional questions, please leave them in the comments section below.

Please share this guide if it was helpful to you.